Fuel Testing
CFCS performs In-House Specification and Contamination testing mainly on Diesel/Middle distillate fuels, however we can assist on other fuel's.
The Following tests have been Engineered to give a good, detailed summary on the Quality of the fuel been tested.
Below in PDF Format are the fuel testing reports we provide per sample tested.
Fuel Test Summary
This is a technical report highlighting the results and test methods used.
Written Fuel Summary
Is a Quick Picture based report Highlighting the condition of the fuel.
The following tests are completed In-House and form our Specification & Contamination Test Suit.
-
Iso 4406 Cleanliness to ASTM D8166-21
-
Bio % F.A.M.E To ASTM D8274
-
Density to ASTM D7777
-
Cetane to ASTM D613
-
Clear & Bright to ASTM D4176
-
Debris/MBG = Visual
-
Free water = Visual
-
Biological Activity = ATP AOAC Certified
-
Flash Point to ASTM D975
-
PPM Moisture to ASTM D6304
-
Cloud Point to ASTM D7397
-
Dielectric Strength = In House
-
Fuel Elemental Analysis & Impurities (ASTM D6728)
-
PH of Fuel = In House Dictated by CFCS if required
-
FBT (Filter blocking tendency) IP 387 Procedure B
-
Viscosity (ASTM D7042)
-
Soap content in Diesel (In House titration)